(new related group 1)

On-Screen Keyboard

Voriges Thema

Nächstes Thema

Bluetooth Tool

With the Bluetooth Tool, you can connect Bluetooth devices, e.g. a keyboard, a mouse or a headset, to your thin client.

The Bluetooth Tool supports the following pairing methods, i.e. the mutual authentication of the Bluetooth device and thin client:

In order to use Bluetooth devices, a Bluetooth USB adapter must be connected to the thin client.

To connect a Bluetooth device with PIN entry, proceed as follows:

  1. Ensure that the pairing mode is enabled on the Bluetooth device.
  2. Launch the Bluetooth Tool via > System > Bluetooth Tool or another launch option, if available.

    The DeviceSearch dialog page will be shown. After a few seconds, the Bluetooth devices found by the thin client will be displayed.

  3. Highlight the desired Bluetooth device and click on Forward.

    A PIN will be shown on the Device setup dialog page.

  4. Enter the PIN shown into your Bluetooth device.

    On the Setup summary dialog page, the status of the connection will be shown.

  5. Click on Close.

To connect a Bluetooth device with a fixed PIN, proceed as follows:

  1. Launch the Bluetooth Tool via > System > Bluetooth Tool or another launch option, if available.

    The DeviceSearch dialog page will be shown. After a few seconds, the Bluetooth devices found by the thin client will be displayed.

  2. Highlight the desired Bluetooth device.
  3. Click on PIN Options.
  4. Select one of the specified PINs or enable Custom PIN and enter the PIN for the Bluetooth device. You will find this PIN in the documentation for your Bluetooth device.

    On the Setup summary dialog page, the status of the connection will be shown.

  5. Click on Close.

To connect a Bluetooth device with automatic PIN allocation, proceed as follows:

  1. Ensure that the pairing mode is enabled on the Bluetooth device.
  2. Launch the Bluetooth Tool via > System > Bluetooth Tool or another launch option, if available.

    The DeviceSearch dialog page will be shown. After a few seconds, the Bluetooth devices found by the thin client will be displayed.

  3. Highlight the desired Bluetooth device and click on Forward.

    A PIN will be shown on the Device setup dialog page and on your Bluetooth device.

  4. If the PINs on the Device setup dialog page and on your Bluetooth device are identical, click on Yes.

    On the Setup summary dialog page, the status of the connection will be shown.

  5. Click on Close.

To cancel pairing to a Bluetooth device, proceed as follows:

  1. Launch the Bluetooth Tool via > System > Bluetooth Tool or another launch option, depending on the configuration.

    The connected Bluetooth device will be shown on the Device Search dialog page.

  2. Highlight the connected Bluetooth device and click on Forward.

    On the Setup summary dialog page, the status of the connection will be shown.

  3. Click on Close.