(new related group 1)

Options

Voriges Thema

Nächstes Thema

Using "Display Switch" function

Identify Displays

Define Primary Display

  1. If necessary, change to the advanced dialog by clicking Advanced.
  2. Select the display you want to define as main display.
  3. Activate Primary Display.

Split display over several screens

The procedure with the minimal dialog is described below. To switch from the advanced to the minimal dialog, click on Simple.

Rotate displays (Page orientation)

The procedure with the minimal dialog is described below, provided that Setup > Accessories > Display Switch > Options > Rotate displays (Page orientation) is activated. To switch from the advanced to the minimal dialog, click on Simple.

Change mouse settings

The procedure with the minimal dialog is described below, provided that Setup > Accessories > Display Switch > Options > Mouse options is activated. To change from the advanced dialog to the minimal dialog, click Simple.

Magnify screen (zoom)

You can magnify the screen content. The effect is equivalent to the screen magnifier in full screen mode with Microsoft Windows: All fonts and graphics are magnified using the same factor; in this way, a virtual screen is created which is larger than the available monitor size. Thus, the user sees a magnified detail of the complete screen content; he can relocate the detail by moving the mouse to the edge of the screen.

  1. If necessary, change to the advanced dialog by clicking Advanced.
  2. Activate Zoom.
  3. Set Virtual Resolution to the highest value that is possible. Example: 1920x1200
  4. Set resolution to a lower value. This value simulates the real resolution of the screen. Example: 1280x800
  5. Click Apply.

    The screen content is magnified. The scaling factor results from the relation between virtual resolution and simulated real resolution.

    When the same content is displayed on several screens (shadow screens), all screens show the same detail. However, you can set the zoom for each screen individually.

Change refresh rate

For standard monitors, 60 Hz is an appropriate refresh rate in most cases.

  1. If necessary, change to the advanced dialog by clicking Advanced.
  2. Set the desired value for Refresh rate.

Restore default settings