Configuring the DHCP Range

  1. In the main menu, press 2 to configure the DHCP range for the built-in DHCP server.

    The DHCP range menu opens.

  2. Enter the following parameters:
  3. Press Y to confirm the settings.

    The DHCP server will restart and assign IP addresses to all devices in the network.

    It is possible to exclude a device from being configured by the built-in DHCP server. For further information, see Adding a MAC Address to the Filter.

    It is possible to use your own DHCP server instead of the built-in DHCP server of the Deployment Appliance, see Using Your Own DHCP Server.